Skip to content
Assessment
LibraryProduction

What goes on a pest scouting sheet for the season?

Spraying by the calendar leaves no record of why. A weekly count written next to an action level set beforehand turns each spray, or each wait, into a decision you can check at the end of the season.

Published Updated 18 min read
In this article

Before the first visit of the season, write on the pest scouting sheet the action level of each pest: the pest count at which you spray. Then, at each weekly visit (scouting: a walk through the field to count what is there), write the count beside the level and the decision after it: spray or wait. With the sheet filled in this way, every spray, and every wait, has a count and a reason beside it, and you check it all at the end of the season. In Paraná, Embrapa (Brazil’s public agricultural research company) runs a weekly scouting program. Over 11 seasons, the program’s soybean fields had a pest control cost of 1.8 sacks a hectare, against 3.8 on fields outside it. That compares two groups, not an experiment.

Embrapa Soja, the soybean unit of Brazil’s public agricultural research company, notes that many farmers still spray insecticide by the calendar, on fixed dates, whatever the count. Whoever sprays this way leaves nothing on paper about whether the count was at the level when they sprayed. This article gives the sheet and the rule for filling it. It gives no levels, products or doses: those are local, and they come from your agronomist or extension service.

In Paraná, a state in southern Brazil, soybean fields in Embrapa’s integrated pest management program averaged 1.7 insecticide applications a season over 11 seasons, against 3.6 on fields outside it. The program asks for weekly counts and spraying only at the action level. That compares two groups of fields and is not an experiment, and the program also had trained technicians and weekly visits, so the gap cannot be attributed to the sheet alone.

What goes on the sheet every week?

One row per visit, one sheet per field. The top of the sheet is filled once, before the first visit: the action level for each pest and crop stage, with its source. Each visit then adds one row with the columns below.

What to write on the sheet at each visit
Column What you write
Date and crop stage The day and the growth stage, on the same scale all season
Count The count at each sampling point (a spot in the field, such as one meter of row), by pest and by size, and the number of points visited
Natural enemies The beneficial insects counted at the same points
Defoliation An estimate of the leaf area eaten
Rain since the last visit Millimeters read from your own rain gauge
Action level Copied from the top of the sheet, for this pest and this stage
Decision Spray or wait
Reason Why you sprayed or waited, in a few words; always written when the count did not decide it
Applied If you sprayed: date, product and dose, copied from the application record

The Embrapa program runs with the Paraná Rural Development Institute (IDR-Paraná, which provides the state’s rural extension). Its technicians inspect at least weekly and record pest density, natural enemies, defoliation and crop stage on sheets or notebooks. They take at least ten points in each inspection, one meter of row each, spread to represent the whole area. The counting method depends on the crop. In soybean they look at young plants by eye and use a beat cloth, a cloth laid between rows onto which plants are shaken, on older ones. For another crop, ask for the counting method and the number of points together with the level.

Never leave the decision empty: it is the column you will read at the end of the season. When the count is at or above the level and you spray, or below it and you wait, the Reason can simply say so, as in the figure below. When you spray with the count below the level, or wait with it above, write the real reason in a few words, for example rain on the way or a crew that could not come.

Does the action match the count against the level?

Spray at or above the level, or wait below it

The Reason can simply say so

Spray below the level, or wait above it

Write the real reason

In a few words, such as rain on the way

The Reason can be brief when the action matches the count against the level, and needs the real reason when it does not.
Figure: One visit on the sheet, for one pest in one field. Source: invented example values built from the article; the level is not a real one and is not to be copied
One row of the scouting sheetWritten before the first visit: the pest, its action level and the source. Written at the visit: date and stage, count, rain since the last visit, decision and reason.One visit, one row (example)Written before the first visitPestPest AAction level5 per pointSourcea name written hereWritten at the visitDate and stageNov 12, stage 3Count, 10 points3 per pointRain since last visit22 mmDecisionwaitReasoncount below the level

Where does the action level come from, and why not copy one?

The action level comes from someone who knows your crop, your pest and your region. It goes on the sheet before the first visit, with that person’s name and the source. Do not confuse it with a second number, the economic injury level, which is the count at which the cost of control equals the benefit. The definition comes from a chapter on integrated pest management in a pasture manual, by a researcher at INTA, Argentina’s public agricultural technology institute. The action level sits below the injury level, because the pest keeps growing between the visit and the spray.

NC State Extension, the extension service of North Carolina State University, adds a point about return. Spraying at the action level is the approach with the best return on the money spent on control, and it may or may not give the highest yield. Waiting until the count reaches the injury level may give the highest yield, but not necessarily the best return.

Price moves the level. CropWatch, the University of Nebraska-Lincoln’s extension site, notes that the economic injury level falls when the crop price rises, with nothing else changed, and that action levels often sit near 80% of that injury level.

CropWatch gives the soybean aphid as an example. Soybean entomologists in the US Midwest recommended keeping its action level at 250 aphids per plant, despite the price rise of 2008. When that level was set, growers had a week to spray before the pest reached the injury level. At the higher soybean prices, that time fell to four or five days. The rule of this sheet follows from that, and CropWatch does not test it. The levels are revised with your agronomist before each season, with the price of the moment, and are not changed during it.

University of Illinois Extension, the extension service of that public university, says what the level depends on: the pest’s damage, the expected yield, the price, the cost of control and other factors. It does not recommend control when the expected loss is smaller than the cost. A level copied from a neighbor, a flyer or another country carries someone else’s price, cost and crop stage, which is why this article gives none.

Ask for the levels in writing, with the crop stage each one applies to. Which product and which dose are your agronomist’s recommendation, and who pays that adviser is worth writing down before you take the levels as given. A level written before the visit should not be moved to fit what you find that day, the same reason to set your harvest loss limit before harvest.

Does counting change how often you spray?

In Paraná the group that counted sprayed less, but the comparison cannot say the count caused it. Embrapa Soja compared soybean fields in its integrated pest management program (weekly counts, action levels, selective insecticides, which spare other insects) with fields outside it over 11 seasons, 2013/14 to 2023/24. The totals add up the fields of all 11 seasons: 1,762 program fields and 5,334 comparison fields.

The averages for the 11 seasons (the simple average of each season’s averages): 1.7 insecticide applications against 3.6, and yield 56.8 against 55.3 sacks per hectare (sc/ha, how soybean yield is counted in Brazil). Cost of control was 1.8 against 3.8 sc/ha, a cost in sacks, which changes with the price of the sack. In 2023/24, the report estimates the cost in reais (Brazil’s currency) per hectare and converts it into sacks at the average price of a sack. That year, 89% of the program’s farmers and 75% of the others did not spray any insecticide against caterpillars.

Figure: Insecticide applications a season, 11-season average, soybean fields in and out of the Embrapa program in Paraná. Source: Carnevalli et al., Documentos 467, Table 5. The field counts add up the 11 seasons
Fields in the program sprayed about half as oftenOver 11 seasons in Paraná, fields in the Embrapa program averaged 1.7 insecticide applications a season and fields outside it averaged 3.6.Insecticide applications a season1.7In the program1,762 fields3.6Outside it5,334 fields

Read the gap with these cautions in mind. The program is more than the sheet: it has trained technicians, weekly visits, action levels fixed beforehand and insecticides chosen to spare other insects, so the sheet cannot be separated from the rest. The authors say the higher yield of program fields may come from other practices, such as sowing date and cultivars.

The comparison fields were surveyed by questionnaire, and 543 farmers answered it in 2023/24, one season of the 11. Among farmers outside the program who know integrated pest management, the authors estimate that 31.4% on average say they use it. So part of the comparison group follows the practice too, which may narrow the contrast. Farms that join a program may also differ from those that do not. The report comes from the program’s own team, which describes the field network as a way to promote and spread the program. None of the sources tests the sheet on its own, or on a large grain farm.

Why would calendar spraying cost more? Two sources describe a mechanism. CropWatch reports growers who added an insecticide to the last herbicide pass to clean up the field. It also killed the insects that eat or parasitize aphids and mites (predators and parasitoids), so more aphids and mites survived and more sprays were needed later. Embrapa describes the same rebound after calendar sprays: the pest coming back in larger numbers. Neither tests the sheet.

CropWatch also gives one exception. Spraying before the pest arrives can make sense, but only for a pest that is hard to find on a visit and causes severe loss. It must also be a pest that cannot be easily controlled once it is injuring the crop, with a relatively high probability of occurring. If you spray before the pest arrives, write that as the reason. Each application on this sheet also has a product. Its mode of action group (how the product acts on the pest) goes on a second sheet: which spray group went on each field, and when.

Where does rain go on the sheet?

In its own column, in millimeters since the last visit, read from a rain gauge on the farm. A count at the level is not always a spray that day: in the Embrapa program the technicians decided on control by the action levels and also by the farmer’s operational concerns and the weather. None of the sources tests whether rain data change the decision to spray. The column is there to record the weather in which each decision was made.

Spraying has a window, like planting, and rain closes it. When the count reaches the level and rain is on the way, the question is which job gets the day. A window for each operation shows how to write that choice before the rush.

For rain alone, a good manual rain gauge is enough, according to the farm weather station guide of the University of Florida’s extension service. It names as an example the gauge of CoCoRaHS, a US collaborative network for measuring rain, hail and snow, which teaches how to measure daily rain by hand. The guide says to place the gauge in the open, as far from obstructions as possible (ideally four times the height of the nearest one, so 20 m from a 5 m obstruction). The collector should be level and open to the sky. Check it weekly, since insects, turf clippings and dirt can plug the funnel.

The NEWA guide, from Cornell University’s farm weather network, also asks for a level gauge and for keeping leaf litter out. For a site among trees it gives a looser rule. A clearing works well because the trees block the wind. The gauge should stand at least half the height of the trees away from them (trees 10 m high, a gauge at least 5 m from them). The manufacturer’s guidelines come first, so follow the manual of the gauge you buy.

Figure: Four weekly visits to one field: the count, the action level and the rain since the last visit. Source: invented example values built from the article; the level is not a real one
Four visits, one sprayCounts of 2, 3, 6 and 4 per point against an example action level of 5. Rain since the last visit was 0, 22, 0 and 14 millimeters. Only the third visit, with a count of 6, ends in a spray.Count per point, four visits (example)Action level 5 (example)2364Visit 1Visit 2Visit 3Visit 40 mm22 mm0 mm14 mmwaitwaitspraywait

What do you write first, and how long does it take?

Start with the levels. Ask your agronomist or extension service for the action level of each pest at each crop stage, and write them at the top of the sheet with the source. Then mark the points to count in each field (at least ten in soybean; for other crops, ask your agronomist), install the rain gauge and fix one visit day for every week. Keep one sheet per field, so that the field’s yield series can sit beside its applications. Setting it up is one sitting, with the levels and last season’s application record on the table. Filling a row takes the minutes after the walk.

At the end of the season, count three things: the visits made, the applications, and how many applications had a count at or above the level on their row. Subtract the third count from the second: what is left are the sprays whose row has no count at the level. Read their reasons before writing next season’s levels on the sheet.

Figure: An example season in three counts: visits, applications, and applications with a count at or above the level. Source: invented example values built from the article
End-of-season balanceIn the example season there were 14 visits, 3 applications and 2 applications with a count at or above the level on their row.One season, three counts (example)Visits14Applications3Applications with a count at the level2

Whoever reads the sheet with the manager and the agronomist at the end of the season has every spray and its reason at hand. For the rest of the field work, see the other production articles, and for the whole farm, farm management.

In the first season the levels come in writing from your agronomist, and with the sheet you can check whether you followed them. After a few seasons, from the Reason column you can see which sprays had no count at the level on their row, and why. Related: How to register each field: code, area and history.

Provenance

Derives from
  1. Carnevalli et al., Resultados do manejo integrado de pragas da soja na safra 2023/2024 no Paraná, Documentos 467, Embrapa Soja, 2024
  2. Reisig, Thresholds - Soybeans, NC State Extension, updated 2026
  3. Wright and Hunt, IPM: As Important Now as Ever, CropWatch, University of Nebraska-Lincoln, 2008
  4. Ves Losada, Manejo integrado de plagas, Manual de pasturas, INTA Anguil and Bayer CropScience, 2005
  5. Integrated Pest Management and Ecosystems, University of Illinois Extension
  6. Fraisse, Braun, Lusher and Staudt, Your Farm Weather Station: Installation and Maintenance Guidelines, AE502, UF/IFAS Extension, 2014, reviewed 2018
  7. Weather Station Placement Guide, NEWA, Cornell University, 2020
What this article covers
Writing, before the first visit, each pest's action level and its source; a weekly sheet with the date and crop stage, the count at the sampling points, natural enemies, defoliation, rain since the last visit, the decision and the reason; and an end-of-season balance of visits and applications.
What it does not cover
Which action levels apply to your crop and region, which product, dose or timing to use, and how to identify a pest, which stay with your agronomist and your extension service. It also leaves out disease and weed scouting and the choice of a weather station beyond the rain gauge.
Published
Updated
Error found
Point out an error and the article is corrected with a note on what changed.

How to cite this article

Rurivia. (2026, October 27). What goes on a pest scouting sheet for the season? https://rurivia.com/en/library/production/pest-scouting-sheet-action-level/


Keep reading

Production

How do you know how much weight a cattle lot really gained?

What an animal has in its gut changes its weight on the scale, so the gain worked out between two weighings can come out smaller or larger than the real one. On a sheet per lot, you write the conditions of each weighing beside the weight.

Oct 27, 2026
Production

When do you sell the lot? Write the rule before it arrives

In one trial the first 14 extra days paid on a carcass sale and lost money on a live sale. So you write the sum for your own way of selling before the lot enters, and list every animal that leaves outside it.

Oct 28, 2026
Production

Does the feed each lot gets match the ration?

The ration is worked out once, and the gap between it and the feed that leaves the store shows up in the bill a month later. On one sheet per lot, you write the two amounts each day and the level at which the ration is reviewed.

Oct 28, 2026
Production

What share of the cows exposed to breeding weaned a calf?

A pregnancy rate says how many cows conceived, not how many calves reached weaning. With one sheet per breeding season, divided by every cow exposed and split by group, you can see at which step the calves were lost.

Oct 27, 2026

Farm Management

If this article were a plant, farm management would be the whole field.

Planning, organizing, leading and controlling: the four functions, what each one decides, and a farm example for each, all on one page.